Technical features: The dryer removes humidity from the system thanks to the absorption agent that it has inside, called “silica gel”. The “silica gel” has uniform ball size and is undissolvable in water and organic solvents; after humidity adsorption from the air it does not expand and does not soften. The “silica gel” when delivered has a residual humidity lower than 2% and can guarantee a dew point of -40°C. How long the silica gel will last depends on the humidity rate and therefore cannot be quantified.
For the best results and long life of the dryer it is recommended to install upstream a filter regulator, a depurator and finally the dryer.
Art. 182/2 |
|
Art. 182/1 |
|
Art. R/182 |
|
| item_name | Art. 182/1, Art. 182/2, Art. R/182 |
|---|---|
| Size | 3/8", 1/2", Silica gel – 240 gr |
| Condensate drain | manual |
| Maximum inlet pressure | bar 10 – psi 145 – kPa 1000 – Mpa 1,0 |
| Maximum temperature at 10 bar | +50° C |
| Fluid | filtered 5 µm compressed air |
| Weight | 0,9 kg |
| Wall fixing screws | M4x50 |
Cyclonic dryer 1/2″ 
